ENGLISH
- ENGLISH
- 简体中文
| Range | 180m@90% reflectivity, 70m@10% reflectivity |
| Non-detection region | 5cm |
| Distance Resolution | 1cm |
| Distance Accuracy | ±5cm@ < 10m; 0.5%@> beyond 10m |
| Repeatability | 1σ:3cm |
| Output Frame Rate² | 100Hz--1000Hz（default 100Hz） |
| Multi-echo | 4 times (not yet open) |
| Ambient-light Suppression | 100Klux |
| Light Source | LD |
| Wavelength of Light Source | 905nm |
| Detection Angle I | 0.5° |
| Size of Light Spot II | 100cm*28cm (horizontal*vertical) @100m |
| Safety Level of Laser | CLASS 1（IEC 60825） |
| Supply Voltage | DC 5V（≥300mA） |
| Power Consumption | ≤1.2W |
| Size III | 44mm*42mm*29mm（length*width*height） |
| Weight | 74g |
| Shell material | Aluminium alloy |
| Installation Specification | 6 bottom installation holes, specification of M3*3.5MM |
| Form of Output Data | Hexadecimal distance value, character string, switching value |
| Communication Interface | UART；CAN |
| Baud Rate | UART：115200；CAN：1M |
| Operation Temperature | -25~60℃ |
| Storage Temperature | -40~85℃ |
| Level of Protection IV | IP67 |
| Shock test | |
| Vibration Test | |
| Certificate | CE；FCC；RoHS；FDA |
| Remote Upgrade Firmware | Embedded Boot Loader function, automatically upgrading TF03 firmware with GUI or interface protocols |
| Customized Frame Rate | With corresponding commands, the frame rate can be continuously configured between 1Hz and 1000Hz. |
| Customized Baud Rate | a)Baud rate in serial port can be configured b)Baud rate in CAN port can be configured and CAN ID can be configured (standard frame and expansion frame) |
| Optional Measuring Patterns | With corresponding commands, the frame rate can be continuously configured between 1Hz and 1000Hz. |
| Optional Measuring Patterns |
a) Continuous detection mode (default) b) Trigger mode c)Multiple-echo measuring mode |
| Switch of Filtering Algorithm | The switch of filtering algorithm can be chosen based on demands |
| Reservation of Configuration Parameters after Power-off | After configuring parameters, a specific command can be sent to to permanently store configurations. |
